Mini plate spinner centrifuge, 384 well PCR plate

KT-MPC2800 mini plate spinner centrifuge is designed for quick spins of samples in PCR plates. Primarily designed for use with 384 well plate and small volumes, it can accommodate skirted, non skirted and semi skirted styles.

The KT-MPC 2800 is the centrifuge designed to centrifuge samples in PCR plates or microplates. Two standard microplates are loaded through an opening in the top of the unit. Sealed plates are loaded vertically and surface tension keeps samples in place. Once the lid is closed, the rotor quickly accelerates to 2200~2800rpm. Pressing the open button engages the friction brake and brings the rotor to a rapid stop. For temperature sensitive applications, the Plate Spinner may be used in a cold room.

  • Model: KT-MPC2800
  • Rotating speed: 2200~2800rpm
  • Timing range: 15sec ~1min59sec
  • Max(RCF): 550xg
  • Short run: Yes
  • Capacity: 2 PCR plates(0.2ml, 384 well plate)
  • Power: 45W
  • Voltage: AC100~240V/50-60Hz
  • Fuse: 250V/3A Ф5×20
  • Dimension(mm): 260240226
  • Weight(kg): 3.3
  • Ambient temperature: 0°C ~ 35°C
  • Acceleration time : ≤10sec(from 0 to 2800rpm)
  • Brake time: ≤4sec(from 2800rpm to 0)
  • Lid Open Auto Stop: Yes
  • Relative humidity ≤70%

KT-MPC2800 384 Well Plate Centrifuge

  • Easy to use, real-time display of all operating information.
  • DC brushless motor, low noise, small interference, maintenance-free.
  • Countdown mode support.
  • When opening the cap will automatically stop running.
  • Fast acceleration from standstill to maximum speed fully in just 10sec.
  • Braking time is short, from the highest speed to a complete standstill in just 4 sec.

Operating Video & Pictures

Packing & Accessories

  • plate centrifuge *1 set
  • power cord * 1pcsu003cstrongu003e(EU,US, CN, JP,etc power plugs available upon request)u003c/strongu003e
  • 250V/3A fuse*3pcs
  • Product performance test table* 1 pcs
  • Certificate of conformity* 1pcs
  • Warranty certificate*1pcs
  • User Manual*1 pcs
  • foam adapter for 0.2MLPCR tube, 8 rows *2pcs

How to centrifuge 384 well plate?

KT-MPC2800 mini plate centrifuge makes the safe and quick spin down of droplets and condensation very easy,and it is very small in size – just 26cm*24cm.

  • u003cstrongu003eStep1:u003c/strongu003e Power on, press the lid button(OPEN), open the lid.
  • u003cstrongu003eStep 2:u003c/strongu003e Put 2 pcs sealed micro plates vertically in a centrifugal tank through a slot in the top of the centrifuge unit. (note: If spinning only one plate, it is extremely important to load another plate of the same brand, style and sample volumes (water can be used) as a balance.If the load weight is not the same on both sides of the rotor, it will cause the device to run shaking, and will damage the device.)
  • u003cstrongu003eStep 3:u003c/strongu003eCheck u0026amp; make sure the micro plates are installed in the correct direction.
  • u003cstrongu003eStep 4:u003c/strongu003e Close the lid.
  • u003cstrongu003eStep5: u003c/strongu003eSet speed u0026amp; time, press “start”.

Related Products

96 well plate centrifuge for 2 PCR Plates

KT-MPC2800 96 well Plate Centrifuge is designed for quick spins of samples in PCR plates.

Microplate centrifuge with rotor and plate

The newly updated KT-TDM3 Microplate Centrifuge brings many innovative features. Microplate centrifuge with two microplate 48/96 wells.

Benchtop plate centrifuge, low speed 3000 rpm

KT-TMD3 is a specially designed benchtop plate centrifuge with a microplate rotor for a 48/96 well.